home

Login | Register
Site Map
Email Us
 
System Configuration
EyeLink 1000 PC Requirments

You must purchase the following model Dell system for your Host PC.
We have extensively tested the EyeLink 1000 system on this computer
and know the computer functions reliably with the EyeLink 1000.


EyeLink 1000 Standard Host PC

Dell Precision 380
Intel® Pentium® 4 Processor 3.2GHz/800MHz
Microsoft® Windows® 2000 or XP Professional Service Pack 2
Small Mini-Tower Chassis
512 MB DDR SDRAM Memory
3.5'' 1.44MB Floppy Drive
40GB IDE (7,200 rpm) Hard Drive or 80GB (7,200 rpm) IDE Hard Drive
24x CD-RW (Read & Write) Drive
LCD Monitor
PS2 or USB mouse
PS2 Keyboard
The above system comes with the necessary two free PCI slots.

EyeLink 1000 Standard Display PC

Please consult with SR Research before purchasing a Display Computer. All EyeLink II Display PCs must have at least one dedicated Ethernet10/100 MBPS port to connect to the EyeLink II Host computer. A second Ethernet card is required if the Display PC is being connected up to an external network.
Please note this may effect the timing in time critical experiments.

Monitor selection is dependant on planned experiment design. We suggest using a 19" or larger CRT monitor. For Gaze Contingent and Smooth Pursuit experiments, the monitor should support a refresh rate of at least 100Hz, but the higher the better . We have tested and are pleased with the 22" ViewSonic G220fB and the Iiyama VM Pro 513 22" CRT Monitor.

For experiments requiring 2 millisecond sound accuracy,
use Creative Labs SoundBlaster Audigy 2 Sound Card.

Basic components for display computer are as follows:
Processor: Intel Pentium 4 Processor 2.8GHz or higher
Operating system: Microsoft® Windows® 2000 or XP Professional Service Pack 1
Memory: 1024MB DDR RAM
Hard Drive: 80GB IDE Hard Drive (7200rpm) or higher
Graphics card: 128 or 256MB Graphics card. ATI or NVIDEA cards are recommended. The more video memory the better.
CD-RW: 24x CD-RW Drive
Please contact SR Research for more information on the lunchbox mobile computer configuration.

EyeLink 1000 Display Laptop/Notebook

Please ask for assistance from SR Research before purchasing this item as configuration may change without warning.

Basic components for display laptop are as follows:
Processor: Intel® Pentium® M Processor 1.70Ghz
Operating System: Microsoft® Windows® 2000 or XP Professional Service Pack 1
Memory: 512MB 266MHz DDR RAM
Hard drive: 40GB or higher 7,200rpm Hard Drive
CD-Rom: 24X CD-RW Drive
USB: Free USB port if using the EyeLink Experiment builder or Data Viewer
Graphics card: 64MB /128MB/256MB or higher depending on Experiment demands

External CRT monitor maybe needed if you plan on running experiments that require fast screen refresh rates above 85Hz which are not achievable on a LCD laptop monitor.
Please see the Display Desktop monitor recommendations.

Back to System Configuration

 


 


 

Copyright © SR Research Ltd. 2001-2008. All Rights Reserved.
EyeLink II, EyeLink 1000, and EyeLink 2K are intended for research purposes only and should not be used in the treatment or diagnosis of any medical condition.
EyeLink is a registered trademark of SR Research Ltd., Mississauga, Ontario, Canada
Last Modified on April 7th, 2008. Email Site Admin.View Legal Notice